 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RECTRON SEMICONDUCTOR TECHNICAL SPECIFICATION TVS 1.5FMCJ SERIES SURFACE MOUNT GPP TRANSIENT VOLTAGE SUPPRESSOR 1500 WATT PEAK POWER 5.0 WATTS STEADY STATE FEATURES * * * * * * Plastic package has underwriters laboratory Glass passivated chip construction 1500 watt surage capability at 1ms Excellent clamping capability Low zener impedance Fast response time DO-214AB 0.125 (3.17) 0.115 (2.92) 0.280 (7.11) 0.260 (6.60) 0.245 (6.22) 0.220 (5.59) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 oC ambient temperature unless otherwise specified. 0.103 (2.62) 0.079 (2.06) 0.060 (1.52) 0.030 (0.76) 0.320 (8.13) 0.305 (7.75) 0.012 (0.305) 0.006 (0.152) 0.008 (0.203) 0.004 (0.102) Dimensions in inches and (millimeters) DEVICES FOR BIPOLAR APPLICATIONS For Bidirectional use C or CA suffix for types 1.5FMCJ6.8 thru 1.5FMCJ200 Electrical characteristics apply in both direction MAXIMUM RATINGS (At TA = 25 oC unless otherwise noted) RATINGS Peak Power Dissipation with a 10/1000uS ( Note 1,2, Fig.1 ) Peak Pulse Current with a 10/1000uS Waveform ( Note 1, Fig.3 ) Steady State Power Dissipation at TL = 75oC ( Note 2 ) Peak Forward Surge Current, 8.3ms single half sine wavesuperimmposed on rated load( JEDEC METHOD )( Note 2,3 ) Maximum Instantaneous Forward Voltage at 50A for unidirectional only ( Note 3,4 ) Operating and Storage Temperature Range o SYMBOL PPPM IPPM PM(AV) IFSM VF TJ, TSTG VALUE Minimum 1500 SEE TABLE 1 5.0 200 SEE NOTES 4 -55 to + 150 UNITS Watts Amps Watts Amps Volts 0 C 2003-12 NOTES : 1. Non-repetitive current pulse, per Fig.3 and derated above TA = 25 C per Fig.2. 2. Mounted on 0.31 X 0.31" (8.0 X 8.0mm) copper pads to each terminal. 3. Measured on 8.3mS single half sine-wave or equivaient square wave, duty cycle = 4 pulses per minute maximum. 4. VF = 3.5V on 1.5FMCJ6.8 thru 1.5FMCJ90 diveces and VF = 5.0V on 1.5FMCJ100 thru 1.5FMCJ400 devices. RATING AND CHARACTERISTIC CURVES ( 1.5FMCJ6.8 THRU 1.5FMCJ200CA ) PPPM, PEAK PULSE POWER, KW PEAK PULSE POWER (PPP) OR CURRENT (IPP) DERATING IN PERCENTAGE,% 100 FIG. 1 - PEAK PULSE POWER RATING CURVE Non-Repetitive Pulse Waveform Shown in Fig.3 TA = 25 100 FIG. 2 - PULSE DERATING CURVE 75 10 50 1.0 0.31X0.31"(8.0X8.0mm) copper pad areas 25 0.1 0.1uS 0 0 25 75 100 125 150 175 200 50 TA, AMBIENT TEMPERATURE,( ) 1.0uS 10uS 100uS 1.0mS TP, PULSE WIDTH, sec FIG. 3 - PULSE WAVEFORM 10mS 150 IFSM, PEAK FORWARD SURGE CURRENT, FIG. 4 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT UNIDIRECTIONAL ONLY 200 8.3ms Single Half Sine-Wave JEDEC Method IPPM, PEAK PULSE CURRENT,% tr = 10usec. Peak Value IPPM Pulse Width (td) is Defined as the Point Where the Peak Current Decays to 50% of IPPM 160 100 IPPM HALF VALUE 2 10/1000usec. Waveform as Defined by R.E.A. AMPERES 120 80 50 40 0 0 td 0 1 10 NUMBER OF CYCLES AT 60 Hz 100 1.0 2.0 t, TIME,mS 3.0 4.0 5.00 ID, INSTANTANEOUS REVERSE LEAKAGE CURRENT, ( uA ) FIG. 5 -STEADY STATE POWER DERATING CURVE FIG. 6 - TYPICAL REVERSE LEAKAGE CHARACTERISTICS 100 PM(AV), STEADY STATE POWER DISSIPATION, WATTS 60 Hz RESISTIVE OR INDUCTIVE LOAD 3.75 10 2.50 1 TA = 25 1.25 0.1 0 0 25 50 75 100 125 150 175 TL, LEAD TEMPERATURE ( ) 200 0.01 0 2 4 6 8 10 12 14 16 18 20 V( BR ) BREAKDOWN VOLTAGE, VOLTS RECTRON TRANSIENT VOLTAGE SUPPRESSORS 1500W SERIES TVS DIODES / DO-214AB ( CASE 4 ) 1500W Breakdown Voltage VBR @IT (Volts) MIN. 1.5FMCJ6.8 1.5FMCJ6.8A 1.5FMCJ7.5 1.5FMCJ7.5A 1.5FMCJ8.2 1.5FMCJ8.2A 1.5FMCJ9.1 1.5FMCJ9.1A 1.5FMCJ10 1.5FMCJ10A 1.5FMCJ11 1.5FMCJ11A 1.5FMCJ12 1.5FMCJ12A 1.5FMCJ13 1.5FMCJ13A 1.5FMCJ15 1.5FMCJ15A 1.5FMCJ16 1.5FMCJ16A 1.5FMCJ18 1.5FMCJ18A 1.5FMCJ20 1.5FMCJ20A 1.5FMCJ22 1.5FMCJ22A 1.5FMCJ24 1.5FMCJ24A 1.5FMCJ27 1.5FMCJ27A 1.5FMCJ30 1.5FMCJ30A 1.5FMCJ33 1.5FMCJ33A 1.5FMCJ36 1.5FMCJ36A 1.5FMCJ39 1.5FMCJ39A 1.5FMCJ43 1.5FMCJ43A 1.5FMCJ47 1.5FMCJ47A 1.5FMCJ51 1.5FMCJ51A 1.5FMCJ56 1.5FMCJ56A 6.12 6.45 6.75 7.13 7.38 7.79 8.19 8.65 9.00 9.50 9.90 10.5 10.8 11.4 11.7 12.4 13.5 14.3 14.4 15.2 16.2 17.1 18.0 19.0 19.8 20.9 21.6 22.8 24.3 25.7 27.0 28.5 29.7 31.4 32.4 34.2 35.1 37.1 38.7 40.9 42.3 44.7 45.9 48.5 50.4 53.2 TYPE MAX. 7.48 7.14 8.25 7.88 9.02 8.61 10.0 9.55 11.0 10.5 12.1 11.6 13.2 12.6 14.3 13.7 16.5 15.8 17.6 16.8 19.8 18.9 22.0 21.0 24.2 23.1 26.4 25.2 29.7 28.4 33.0 31.5 36.3 34.7 39.6 37.8 42.9 41.0 47.3 45.2 51.7 49.4 56.1 53.6 61.6 58.8 (mA) 10 10 10 10 10 10 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Reverse Stand off Voltage VWM (Volts) 5.50 5.80 6.05 6.40 6.63 7.02 7.37 7.78 8.10 8.55 8.92 9.40 9.72 10.2 10.5 11.1 12.1 12.8 12.9 13.6 14.5 15.3 16.2 17.1 17.8 18.8 19.4 20.5 21.8 23.1 24.3 25.6 26.8 28.2 29.1 30.8 31.6 33.3 34.8 36.8 38.1 40.2 41.3 43.6 45.4 47.8 Maximum Reverse Leakage at VWM ID(uA) 1000 1000 500 500 200 200 50 50 10 10 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Maximum Peak Pulse Current IPPM (Amps) 139 143 128 133 120 124 109 112 100 103 92.6 96.2 86.7 89.8 78.9 82.4 68.2 70.8 63.8 66.7 56.6 59.5 51.5 54.2 47 49 43.2 45.2 38.4 40 34.5 36.2 31.4 32.8 28.8 30.1 26.6 27.8 24.2 25.3 22.1 23.1 20.4 21.4 18.6 19.5 Maximum Clamping Voltage at IPPM VC (Volts) 10.8 10.5 11.7 11.3 12.5 12.1 13.8 13.4 15.0 14.5 16.2 15.6 17.3 16.7 19.0 18.2 22.0 21.2 23.5 22.5 26.5 25.2 29.1 27.7 31.9 30.6 34.7 33.2 39.1 37.5 43.5 41.4 47.7 45.7 52.0 49.9 56.4 53.9 61.9 59.3 67.8 64.8 73.5 70.1 80.5 77.0 RECTRON TRANSIENT VOLTAGE SUPPRESSORS 1500W SERIES TVS DIODES / DO-214AB ( CASE 4 ) 1500W TYPE Breakdown Voltage VBR @IT (Volts) MIN. MAX. 68.2 65.1 (mA) 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 1.0 Reverse Stand off Voltage VWM (Volts) 50.2 53.0 55.1 58.1 60.7 64.1 66.4 70.1 73.7 77.8 81.0 85.5 89.2 94.0 97.2 102 105 111 121 128 130 136 138 145 146 154 162 171 Maximum Reverse Leakage at VWM ID(uA) 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 5.0 Maximum Peak Pulse Current IPPM (Amps) 16.9 17.6 15.3 16.3 13.9 14.6 12.7 13.3 11.5 12.0 10.4 10.9 9.9 10.3 9.1 9.5 8.4 8.7 7.3 7.6 6.8 7.1 6.4 6.7 6.1 6.4 5.4 5.7 Maximum Clamping Voltage at IPPM VC (Volts) 89.0 85.0 98.0 92.0 109 104 118 113 131 125 144 137 158 152 173 165 187 179 215 207 230 219 244 234 258 246 287 274 1.5FMCJ62 1.5FMCJ62A 1.5FMCJ68 1.5FMCJ68A 1.5FMCJ75 1.5FMCJ75A 1.5FMCJ82 1.5FMCJ82A 1.5FMCJ91 1.5FMCJ91A 1.5FMCJ100 1.5FMCJ100A 1.5FMCJ110 1.5FMCJ110A 1.5FMCJ120 1.5FMCJ120A 1.5FMCJ130 1.5FMCJ130A 1.5FMCJ150 1.5FMCJ150A 1.5FMCJ160 1.5FMCJ160A 1.5FMCJ170 1.5FMCJ170A 1.5FMCJ180 1.5FMCJ180A 1.5FMCJ200 1.5FMCJ200A 55.8 58.9 61.2 64.6 67.5 71.3 73.8 77.9 81.9 86.5 90.0 95.0 99.0 105 108 114 117 124 135 143 144 152 153 162 162 171 180 190 74.8 71.4 82.5 78.8 90.2 86.1 100 95.5 110 105 121 116 132 126 143 137 165 158 176 168 187 179 198 189 220 210 Notes : 1. VBR measured after IT applied for 300ms. IT = square pulse or equivalent. 2. For bidirectional use C or CA suffixs for all types (ex. 1.5FMCJ6.8C,1.5FMCJ200CA) electrical characteristics apply in both directions. 3. For bidirectional types having VWM of 10 volts and less, the ID Iimit is doubled. 4. All devices UL listed file# E211196. RECTRON Mounting Pad Layout 0.185 MAX. (4.69 MAX.) 0.121 MIN. (3.07 MIN.) 0.060 MIN. (1.52 MIN.) 0.320 REF Dimensions in inches and (millimeters) RECTRON |
Price & Availability of 15FMCJ62A
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |